Were your port for thousands of hard to find boat parts, original manufacturers parts and marine surplus. Check out this deal!!
Boat part number 8304857 is a new OEM dash panel kit with gauges for 2020, 1750 / 1850 Bass Hawk SC Crestliner Boats, part number 2299605 .
Kit includes the following:
- (1) Multifunction Speedometer / Fuel Gauge | P/N: 71013F | Pitot connection
- (1) Multifunction Tachometer / Trim Gauge | P/N: 71012F | Gasoline, Mercury engines | 4/6/8 cylinder inboard, 2/3/4/5/6 pole outboard
- (1) Port Switch Panel
- (1) Starboard Switch Panel
- (1) Blank Panel
GaugesThis kit includes (2) Sterling Silver/Silver gauges from Teleflex Marine. Each gauge has a domed lens, silver bezel, silver face, orange/black needles, and black graphics. They measure approximately 3 3/4" Dia. across the bezel and require an approximate 3 1/4" Dia. cutout. They come connected to a wire harness.
Port Switch PanelThis switch panel is constructed out of brushed black plastic with a matte finish.
- Overall Dimensions: 2 1/2" W x 8" H
- Mounts: (4) 3/16" Dia. mounting holes
This panel features the following pre-installed red illuminated toggle switches:
- Courtesy Lights | ON/OFF
- Auto/Manual Livewell | ON/OFF/ON
- Recirc | ON/OFF
Starboard Switch PanelThis switch panel is constructed out of brushed black plastic with a matte finish.
- Overall Dimensions: 2 1/2" W x 8" H
- Mounts: (4) 3/16" Dia. mounting holes
This panel features the following pre-installed red illuminated toggle switches:
- Master Power | ON/OFF
- Navigation/Anchor Lights | ON/OFF/ON
- Bilge | ON/OFF
Blank PanelThis blank panel is constructed out of brushed black plastic with a matte finish.
- Overall Dimensions: 16 1/4" W x 8" H
- Mounts: (8) 1/8" Dia. mounting holes
Please check with your local boat brand dealer for boat / brand / model / year cross-referencing compatibilities.
Tag reads: ELEC PKG, MERC ANALOG BASSHAWK SC 20
Specifications:
- Boat Manufacturer: Crestliner
- Model: 1750 Bass Hawk SC / 1850 Bass Hawk SC
- Year: 2020
- Part Number: 2299605
- Part Manufacturer: Marine Electrical Products (MEP)
- Material: Plastic
- Color: Brushed Black
- Finish: Matte
- Fuel: Gasoline
- Set Up For: 4/6/8 cylinder inboard, 2/3/4/5/6 pole outboard
- Engines: Mercury engines
This gauge comes equipped with a new style compression fitting, but you can easily adapt it to the old style pitot nipple by unscrewing the fitting and replacing with a 1/8" to 1/8" female hose barbed fitting. We also have the converter fitting available. Our stock #1022048.Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Hardware and instruction / installation manual not included.
8304857--FJ925
We stand behind our products and maintain great relationships with our customers. If you are having an issue, please contact us with an eBay message first before opening an eBay case and we will make every effort to resolve any concerns.
